[su_tabs vertical=”yes”][su_tab title=”Product Details”]

Featured

2 Soldering Irons can Be Used

Can be prepared with 2 soldering irons. Allows different types of work [such as micro soldering / high power work (150W)] at the same time.

Individual Temperature Setting

Independent displays make settings clear.

Enables Reworking of Chip Parts

Allows you to rework chip parts using 2 tips at a time.

Advanced Functions (PAT.)

Equipped with intelligent functions (sleep, sleep release, shutdown and Key lock) based on the RX-802AS.

Wide Variety of Tips

More than 40 tips are available.

HOW TO CHANGE TIPS

Slide the lever in the direction of the arrow. The tip will come out. Hold and pull the plastic housing of the tip.

Functions

Tip-Temperature Recovery Features

Accessories

Handpiece Grip Rubber

[/su_tab]
[su_tab title=”Specifications”]

Specifications

Model	RX-822AS
Voltage	110–120V, 220–240V AC 50/60Hz
Power Consumption	220–260W
Power Cord Length	1.5m inlet type
Temperature Setting Range	50–450°C
Insulation Resistance	Over 100MΩ (500V DC)
Ripple temperature	±5˚C (unloaded)
Accessories	Soldering Iron Stand (ST-21 ) × 2

Control Unit

Output Voltage	24V AC
Dimensions	116(W) × 105(H) × 194(D)mm
Weight	4.9kg

Soldering Unit

Voltage/Consumption		Soldering Unit1 (RX-85GAS) : 24V AC / 72W·150W
		Soldering Unit2 (RX-80GAS) : 24V AC / 72W
Ground Resistance		Less than 2Ω
Leak Voltage		Less than 2mV
Heater		Nichrome heater
Cord Length		Soldering Unit1 :1.5m, Soldering Unit2 : 1.2m
Length	RX-85GAS	174mm (with RX-85HRT-5D)
	RX-80GAS	158mm (with RX-80HRT-B)
Weight	RX-85GAS	39g (with RX-85HRT-5D)
	RX-80GAS	28g (with RX-80HRT-B)

Equivalent to IPC/EIA J-STD-001C

*The length does not include the cord bushing. The weight does not include the cord.

NOTE: Two RX-85GAS (150W) irons cannot be used together.

[/su_tab]
[/su_tabs]