No products in the cart.
Telephone Plair Tu-5684R
Feature
Vertical crimping and project effort to ensure that the crimping results.
Multiple die to choose from, covering all common
Telephone terminal specifications.
Cut some with protection. To avoid injury.
Circular twisted pair UTP / STP function
With the energy saving device, the pressure is strong and the function is used.
Instructions
Non-Ratchet Type: Remove the cosed lock to open the handles.
Ratchet Type: Squeeze the handles until it stops to open the handles
• Cutting modular cable:
Place the single-bladed side of the tools cutter facing you and cut
the modular cable to the desired length. Make sure to cut the ends
of the cord straight across, not diagonally
• Stripping modular cable Flat Cable
2a.Insert 4P/6P cable into the two-bladed side of the tools stripper
until it tooches the stop guide.
2b.Insert 8P cable into the two-bladed side of the tool,s stripper and
• et it extend a test the lower cut blade.
• Squeeze handles until it stops,cable must be kept perpendicular
and then pull from the tool.
• Stripping Round Cable
Insert the cable into the round stripping hole turn the crimper in
counter counterclockwise direction and cable in clockwise at the same time.
• Remove the outer jacket insert the stripped cable into the plug and
be sure the left wire at one end matches the right wire at the other end.
• Place modular plug with cable into the tool, s holder, Be sure the
stripped wire is between the tab and gold contacts.Squeeze handles
until it stops.
7.4P holder is located on the back side of the tool.
