Fluke 101 Digital Multimeter/i400E Clamp Kit

9,500

Key features

Fluke 101 Basic Digital Multimeter

Basic dc accuracy 0.5%
CAT III 600 V safety rated
Diode and continuity test with buzzer
Small lightweight design for one-handed use
Rugged, durable design
Automatic shutdown
Battery is easy to replace

Fluke i400E AC Current Clamp

Compatible with most Fluke multimeters or mV ac measurement tools with these features:
400 mV ac range
19.05 mm banana jack inputs
Input accuracy of 2 % or greater to take full advantage of the accuracy of the product
Input impedance of >1 M?
1 mV/A ac output guarantees easy current readings on you meter
CAT III 600 V safety rating
Specially designed to offer maximum utility in a very compact shape
Take accurate current readings

Categories: ,

Description

 

 

 

Product overview:

Designed for basic electrical tests, the Fluke 101 digital multi-meter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multi-meter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multi-meters, the Fluke 101 digital multi-meter is your best choice.

The Fluke i400 E AC Current Clamp is an ideal tool to extend current measurement. It is designed to work with the new Fluke 101, 106 and 107 palm sized digital multi-meters, as well as most Fluke mult-imeters or other voltage measurement tools that accepts 19.05 mm shrouded banana plugs and has mV ac measurement functionality.

Product Specification:

 

Electrical specifications
V AC (40-500Hz) Range 600.0 mV
6.000 V
60.00 V
600.0 V
Resolution 0.1 mV
0.001 V
0.01 V
0.1 V
Accuracy 3.0% ±3 digit
1.0% ±3 digit
V DC Range 6.000 V
60.00 V
600.0 V
Resolution 0.001 V
0.01 V
0.1 V
Accuracy 0.5% ±3 digit
Resistance Ohms Range 400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ
Resolution 0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ
Accuracy 0.5% ±3 digit
0.5% ±2 digit
0.5% ±2 digit
0.5% ±2 digit
0.5% ±2 digit
1.5% ±3 digit
Capacitance Range 50.00 nF
500.0 nF
5.000 µF
50.00 µF
100.0 µF
Resolution 0.01 nF
0.1 nF
0.001 µF
0.01 µF
0.1 µF
Frequency
(10 Hz – 100 kHz)
Range 50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz
Resolution 0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz
Duty cycle Range 0.1% to 99.9%
Resolution 0.1%
General specifications
CAT rating CAT III 600 V
V AC range 600.0 V
V DC range 600.0 V
Ohms range 40.00 MΩ
Auto shutoff Y
Continuity Y
Capacitor 100.0 µF
Frequency 100.0 kHz
Hold No
Duty cycle Yes
Size 130 x 65 x 27mm
Weight 160 g
Battery Two AAA
Warranty 1 year
Environmental specifications
Operating temperature 0 °C to +40 °C
Storage temperature -30 °C to +60 °C
Operating humidity Non condensing (<10 °C)
<=90% RH (at 10 °C to 30 °C)
<=75% RH (at 30 °C to 40 °C)
(Without condensation)
Operating humidity, 40 MΩ 80% RH 10 °C to 30 °C, 70% RH 30 °C to 40 °C
Operating altitude 2,000 meters
Storage altitude 12,000 meters
IP rating IP 40 per IEC 60529
Vibration requirements MIL-PRF-28800F, Class 2
Drop test requirements -10°C and 1 meter to surface, per IEC-61010-1, and Fluke SOP 39.1 for portable Hand-held equipment
Shipping container drop per Fluke SOP 39.
EMI, RFI, EMC Must meet all applicable requirements in
IEC/EN 61326-1
Absorption/corrosion Per Fluke SOP 39.1
Temperature coefficients Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 ºC

Fluke i400E AC Current Clamp

 

Electrical specifications
AC current range 1 A to 400 A
Output signal 1 mV/A ac
Accuracy 2.0% ±5 digits (45 Hz to 65 Hz)
2.5% ±5 digits (65 Hz to 400 Hz)
Typical bandwith 5 Hz to 20 kHz
Working voltage 600 V ac rms, in compliance with IEC 61010-1 and IEC 61010-2-030
Load impedance 1 A to 400 A
Maximum non-destructive current 600 A
Jaw inner diameter 30 mm
Maximum wire size 600 MCM
Standard plugs 19.04 mm dual banana plugs
Safety specifications
Category rating IEC 61010-1 and IEC 61010-2-030/IEC 61010-2-031 and
IEC 61010-2-032: 600 V CAT III
Pollution Degree 2
Electromagnetic environment IEC 61326-1: Portable
General specifications
Output cable length 1 m
Operating temperature -10 °C to +50 °C
Storage temperature -30 ºC to +60 ºC
Relative humidity ≤90% at 10 °C to 530 °C
≤75% at 30 °C to 540 °C
≤45% at 40 °C to 50 °C
IP rating IEC 60529: IP30 when jaw closed
Temperature coefficients Add 0.1 x specified accuracy for each °C above 28°C or below 18 °C.
Operating altitude 2,000 meters
Storage altitude 12,000 meters
Vibration requirements MIL-PRF-28800F, Class 2
Drop test requirements -10 °C, 1m, 6 sides, oak wood
Jaw impact test requirements Follow EN/IEC 61010-2-032:2012
EMI, RFI, EMC IEC/EN 61326-1
Dimensions (H x W x D) 146 x 62 x 34 mm
Weight 150 g

Reviews

There are no reviews yet.

Be the first to review “Fluke 101 Digital Multimeter/i400E Clamp Kit”

Your email address will not be published. Required fields are marked *