SERVICE STATION SVS-580AS

Desoldering in an instant, with reduced solder residue!
Combines desoldering gun and temperature-controlled soldering iron in one unit.

Categories: ,

Features

SVS-580AS

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)

Step 1

Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2

Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity

With open-valve mechanism

Ceramic Heater with Internal Sensor

A wide range for terminals, connectors and flat ICs

Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

Zero Volt Switch Circuit

Reduces noise during heater ON/OFF

Replaceable Cartridge Filter

Makes changing the filter easy

TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES

Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)

Vacuum pressure compared with other goot models

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.

Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS

Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS

Specifications

MODEL SVS-580AS
Voltage 110V,120-130V,220-240V AC 50/60Hz
Power Consumption 110V,120-130V (200W)
220-240V (270-300W)
Power Cord Lengtd 1.5m
TemperatureSetting Range Deoldering Unit 250−450˚C
Soldering Unit 200−480˚C
Insulation Resistance Over 100MΩ(500V DC)
Vacuum Pump System Diaphragm system
Vacuum – 0.08MPa (-600mmHg)
Accessories Cleaning pin TP-100CP-13
Soldering iron stand ST-76
Total Weight 4.0kg (w/o cord )

Box & Unit

CONTROL BOX

CONTROL BOX
Output Voltage 110V,120-130V,220-240V AC
Dimensions 205(W) x 170(H) x 160(D) mm
Weight 3.6kg (w/o cord, hose )

DESOLDERING UNIT

Input Voltage/Power Consumption 110V,120-130V,220-240V AC 85W
Heater Ceramaic Heater
Cord Lengtd 1.2m
Dimensions 220 x 155mm
Weight 250g (w/o cord, hose )
Standard Nozzle TP-100N-S5

SOLDERING UNIT

SOLDERING UNIT
Input Voltage/Power Consumption 110V,120-130V,220-240V AC 70W
Ground Resistance Less tdan 2Ω
Leak Voltage Less tdan 2mV
Heater Ceramic heater
Cord Lengtd 1.2m
Lengtd 190mm (witd PX-2RT-B w/o cord bushing )
Weight 70g (witd PX-2RT-B w/o cord )
Standard Tip PX-2RT-B

Reviews

There are no reviews yet.

Be the first to review “SERVICE STATION SVS-580AS”

Your email address will not be published. Required fields are marked *