No products in the cart.
CMP-1006 Digital Clamp-on multimeter
safe, insulated measuring clamps,
autoranging/manual range selection,
DATA HOLD function, for holding measured values,
backlit LCD,
DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
MAX/MIN function,
over range indication,
AUTO-OFF function.
Description
TRUE RMS) up to 1000 A.
Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling)
AC/DC voltage measurement (TRUE RMS) up to 600 V.
Resistance measurement and continuity test:
continuity test with acoustic signalling (beeper) for resistance below 40.
Temperature measurement (Fahrenheit and Celsius units).
Frequency measurement.
Duty cycle measurement.
Diode test.
Category: Clamp Meters
Related products
Electric security:
measurement category: CAT III 600 V acc. to EN 61010 – 1:2004
protection class acc. to EN 60529: IP40
Other technical data:
power supply: 9 V battery type 6LR61
display: 6600 counts, backlit LCD
continuity test: threshold 40 Ω; test current < 0,5 mA
diode test: test current of 0,3 mA, typical open circuit voltage < 3 V DC, typical
low battery indication: BAT displayed
over range indication: 0L displayed
sampling rate: 2 times per second
INRUSH: integration time 100 ms
temperature sensor: type K thermocouple
input impedance: 10 MΩ (V DC and V AC)
AC bandwidth: 50…400 Hz (A AC and V AC)
auto power OFF: approx. 25 min.
dimensions: 229 x 80 x 49 mm
weight: 303 g
accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
quality standard: ISO 9001
Rated operational conditions
internal clamp diameters: d1 = 36 mm/d2 = 52 mm
operating temperature: +5…+40°C
storage temperature: -20…+60°C
operating humidity: max 80% up to 31°C decreasing linearly to 50% at 40°C
storage humidity: <80%
operating altitude: max 2000 m
pulse width: 100μs…100 ms,
frequency range: 30 Hz…5 kHz,
sensitivity: 30 Hz…5 kHz: 10 Vrms, 5 kHz…15 kHz: 40 Vrms.
[/su_tab]
Specification
AC/DC current measurement (TRUE RMS)
DC voltage measurement
AC voltage measurement (TRUE RMS)
Resistance measurement
Frequency measurement
Temperature measurement
Duty cycle measurement[/su_table]
[/su_tab]
[/su_tabs]
| Range | Resolution | Accuracy (DC) | Accuracy (AC) |
|---|---|---|---|
| 0…659,9 A | 0,1 A | ±(2,5% m.v. +5 dgt) | ±(2,5% m.v + 8 dgt) for f = 50…60 Hz |
| 660…1000 A | 1 A | ±(2,8% m.v. +8 dgt) | ±(2,8% m.v. + 8 dgt) for f = 50…60 Hz |
| Range | Resolution | Accuracy | |
| 0…6,599 V | 0,001 V | ±(1,5% m.v. + 3 dgt) | |
| 6,60…65,99 V | 0,01 V | ±(1,5% m.v. + 3 dgt) | |
| 66,0…600,0 V | 0,1 V | ±(1,5% m.v. + 3 dgt) | |
| Range | Resolution | Accuracy | |
| 0…6,599 V | 0,001 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz | |
| 6,60…65,99 V | 0,01 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz | |
| 66,0…600,0 V | 0,1 V | ±(1,8% m.v. + 5 dgt) for f = 50…60 Hz | |
| Range | Resolution | Accuracy | |
| 0,0…659,9 Ω | 0,1 Ω | ±(1,0% m.v. + 4 dgt) | |
| 0,660…6,599 kΩ | 0,001 kΩ | ±(1,5% m.v. + 2 dgt) | |
| 6,60…65,99 kΩ | 0,01 kΩ | ±(1,5% m.v. + 2 dgt) | |
| 66,0…659,9 kΩ | 0,1 kΩ | ±(1,5% m.v. + 2 dgt) | |
| 0,660…6,599 MΩ | 0,001 MΩ | ±(2,5% m.v. + 3 dgt) | |
| 6,60…66,00 MΩ | 0,01 MΩ | ±(3,5% m.v. + 5 dgt) | |
| Range | Resolution | Accuracy | |
| 30,0…999,9 Hz | 0,1 Hz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle | |
| 1,000…9,999 kHz | 0,001 kHz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle | |
| 10,00…15,00 kHz | 0,01 kHz | ±(1.2% m.v. + 2 dgt) sensitivity:30…5 kHz:10 Vrms min. 5 kHz…15 kHz:40 Vrms min. for 20%…80% duty cycle | |
| Range | Resolution | Accuracy | |
| -20…760°C | 0,1°C | ±(3,0% m.v. + 5°C) | |
| -4…1400°F | 0,1°F | ±(3,0% m.v. + 9°F) | |
| Range | Resolution | Accuracy | |
| 10,0…94,9% | 0,1% | ±(1,2% m.v. + 2 dgt) |
