# RS PRO Soldering Station, 220 ? 240V

- Link: https://varietyhouse.com.pk/shop/rs-pro-soldering-station-220-%e2%86%92-240v/
- Published: 2021-08-07T12:54:59+00:00
- Author: admin

[su_tabs vertical=”yes”][su_tab title=”Features: ” disabled=”no” anchor=”” url=””
target=”blank” class=””]

### Features:

 * 1. Microprocessor-controlled, closed circuit sensor design, high power and quick
   warm-up times.
 * 2. Adjustable air flow, air volume and temperature, suitable for a variety of
   applications.
 * 3. Handle contains a sensor to switch between work and sleep mode for operational
   convenience.
 * 4. Auto Cool-Off Process to prolong the life of heating element.
 * 5. Plastic shell, compact body, small footprint.
 * 6. Comes with brushless motor, providing long service life, quiet operation.

[/su_tab]
 [su_tab title=”Specification” disabled=”no” anchor=”” url=”” target=”
blank” class=””]

### Specification:

[su_table responsive=”yes”]

  |

#### Model No.

  |

#### 124-4133

  |  
 |  Power Input |  AC220~240V
 50Hz |  
 |  Power Consumption |  700W |  
 |  Temperature Range |  100-450℃ |  
 |  Air Volume |  120L/min（Max）  |  
 |  Heating Element |  Metal Heating core |  
 |  Equipment noise |  <45dB |  
 |  Temperature Display |  LED |  
 |  Weight |  1.32kgs |  
 |  Machine Size(mm)  |  170x170x140 (include holder) |  
 |  Overall package(mm) |  280x185x170 |  
 |  Fuse Type |  250V/5A |

[/su_tab]
 [su_tab title=”Applications” disabled=”no” anchor=”” url=”” target=”blank”
class=””]

### Application

1.Suitable for desoldering multiple components.
 2.Ideal for heating shrink, viscidity
removal, lacquer removal, preheating and more.

### Operation Instruction

1. Set the heat nozzle (large caliber nozzle is preferred).
 2. Switch the power
on. The screen will display “- – -“, this represents standby mode. 3. Press “▲”or“
▼”button to adjust the temperature. 4. Adjust the airflow knob to set up the required
air volume. Operate normally when the temperature is stable. 5. Put the handle back
on the holder once you have finished using. Once the temperature falls below 100
℃, the station will switch to standby mode. 6. Once the rework station has cooled,
switch the power off and unplug the power cord.

### Attention

Please set the temperature as low as possible when using the high airflow
 volume
to prolong the heating element service life and IC chips protection.

#### Setting up Temperature

1. Press “▲”or “▼”button to set up the temperature. The screen will display the

selected temperature. 2. By pressing “▲” once, the temperature will increase 1℃,(
the screen will reflect this). 3. By pressing “▼” once, the temperature will decrease
1℃, (the screen will reflect this). 4. When pressing the “▲”or “▼” button continuously,
the temperature will increase or decrease rapidly. .

### Note: Explanation of Symbols

A. “- – -“represents the temperature is lower than 100℃ in standby mode,
 and the
handle is resting in the holder. B. “S-E” represents that the switch turned on but
the sensor of heat gun is damaged.

### Terms of use

1. The air outlet and its surrounding area may be very hot.
 2. It is recommended
not to put the heat gun on the work top surface always return to its holder. 3. 
Please keep the air outlet unblocked. 4. The distance between the air outlet and
the object shall be no less than 2mm. 5. Choose a suitable nozzle in accordance 
with working requirements. Different nozzles may have different temperatures.

### Fuse replacement

When a fuse is blown, replace with the same type of fuse. (see below picture)
 1.
Unplug the power cord from the power socket. 2. The fuse holder is located under
the AC power socket, use the slotted (–) screwdriver to loosen the fuse holder. 
3. Replace the fuse with a new one. 4. Put the fuse holder back in place. [/su_tab][
su_tab title=”SAFETY INSTRUCTIONS” disabled=”no” anchor=”” url=”” target=”blank”
class=””]

### SAFETY INSTRUCTIONS

Warnings and cautions are placed at critical points in this manual to direct
 the
operator’s attention to significant items. They are defined as follows:

#### WARNING:

 Failure to comply with a WARNING may result in serious injury or
 death.

CAUTION:

 Failure to comply with a CAUTION may result in injury to the
 operator, or damage
to the items involved.

### NOTE :

 A NOTE indicates a procedure or point that is important to the process
 being described.

### EXAMPLE:

 AN EXAMPLE is given to demonstrate a particular procedure,
 point or process. Be
sure to comply with following WARNINGS and CAUTIONS for your safety.

#### WARNING

Do not change or disassemble any components related to this product, as it
 may 
result in the product being damaged. When you need to replace the fuse, be sure 
to turn off the power before operating. Whilst operation, do not turn off the power
suddenly; place the heat gun in the holder and turn off the power once it has cooled
down. Failure to do so may damage the product.

#### CAUTION

When the power is ON, the temperature of the hot air and the nozzle ranges
 from
100 to 450℃(212 to 842℉). To avoid injury to personnel or damage to items in the
work area, observe the following: ** Do not direct the hot air toward personnel 
or touch the metal parts near the nozzle. ** Do not use the product near combustible
gases or flammable materials. ** Advise those in the work area that the unit can
reach very high temperatures and should be considered potentially dangerous. ** 
Turn the power OFF when no longer using or when leaving it unattended. ** Before
replacing parts or storing the unit, allow the unit to cool and then turn the power
OFF. To prevent accidents and failures, be sure to take the following precautions:**
Do not strike the handpiece against hard surfaces or otherwise subject it to physical
shock. ** Be sure the unit is grounded. Always connect power to a grounded receptacle.**
Do not disassemble the machine. ** Do not modify the unit. ** Use recommended replacement
parts. ** Do not wet the unit or use the unit with wet hands. ** Remove power cord
by holding the plug – not the wires. ** Make sure the work area is well ventilated.**
The product is not intended for use by children or infirm persons without supervision.**
Children should be supervised to ensure that they do not play with the product.

### Packing List：

 SMD Rework Station (include holder) x1
 Heat Gun x1 Air nozzle x 3 Power cord x2(
EU & UK power cord) User’s manual x1 [/su_tab] [/su_tabs]