SERVICE STATION SVS-800AS - Variety House

SERVICE STATION SVS-800AS

Omnifunctional machine for soldering,
desoldering and reworking.

Categories:

Features

SERVICE STATION

REWORK UNIT

The temperature can be set to max 550°C.

SOLDERING UNIT

Good for a wide range of soldering work with 70W heater.

DESOLDERING UNIT

Instant desoldering with open-valve mechanism.(Please refer to the next page.)

INDIVIDUAL POWER SWITCHES

Along with the main power switch, there are switches for soldering, desoldering, and reworking.

Independent Pumps

Desoldering and reworking operate simultaneously

400% More Suction Capacity

With open-valve mechanism

Ceramic Heater with Internal Sensor

A wide range for terminals, connectors and flat ICs (soldering & desoldering)

Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

Zero Volt Switch Circuit

Reduces noise during heater ON/OFF

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)

Step 1

Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2

Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

Replaceable Cartridge Filter

Makes changing the filter easy

TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES

Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)

Vacuum pressure compared with other goot models

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.

Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS

Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500ASs

Specifications

MODEL SVS-800AS
Voltage 220-240V AC 50/60Hz
Power Consumption 670-760W
Power Cord Length 1.5m Inlet type
Temp. Setting Range Desoldering Unit 250−450°C
Soldering Unit 200−480°C
Rework 150-550℃
Insulation Resistance  Over 10MΩ(500V DC)
Vacuum Pump System Diaphragm system
Vacuum – 0.08MPa (-600mmHg)
Air Flow 5-25L /min
Accessories Cleaning pin TP-100CP-13 / Soldering iron stand ST-76
Total Weight 9.3kg
Back to top