# SG 8650 Pro HOT AIR STATION

- Link: https://varietyhouse.com.pk/shop/sg-8650-pro-hot-air-station/
- Published: 2025-10-03T13:00:19+00:00
- Author: mehar haza

# SG 8650 Pro HOT AIR STATION

 * Compared with 8650, the appearance of the host is the same, and the ROC curve
   identifier is added to the plane version
 * In terms of function, the soft mode is canceled, the curve heating function is
   added, and the general mode and high-speed mode are retained
 * Preset 3 groups of working interval, each group can be free to set the preheating
   temperature and heating time, each group of temperature reaches the preset temperature
   automatically into the working mode of the first group, when the third group 
   of temperature reaches, the machine beeps, then the welding operation can be 
   carried out
 * After entering the ROC curve mode, the machine panel will display the current
   stage, real-time temperature, air volume, and working countdown, and automatically
   jump to the next stage after the completion of each stage until the three stages
   of heating are completed
 * Since the first and second sections are preheating, it is only necessary to set
   the temperature air volume of the third section, and the temperature air volume
   of each section can be freely set, and the longest working time is 330 seconds
 * Upgrade the new wind gun handle, the appearance of the work and the original 
   has a larger upgrade, the key is smaller, in the original 4 groups of working
   memory based on retaining the new wire control function
 * In curve mode, CH1/CH2 is used to set the temperature, CH3/CH4 is used to set
   the air volume, and the cold air button is used to open the curve mode. Hold 
   down the button for 3 seconds to restore the cold air function.
 * The upgraded version of the knob heating core, with no screw fixing, or hand 
   twisting can be unlocked and replaced, with the standard 7A, and 11B heating 
   cores each.
 * Add a 15*15mm, 15*17mm wind nozzle each, with a special wind gun frame, welding
   motherboard more accurate and convenient.
 * Upgrade the 252 bracket with one more front plug than the 251