Name: SERVICE STATION SVS-580AS - Variety House
Brand: Goot Japan

Features

SVS-580AS

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)

Step 1

Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2

Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity

With open-valve mechanism

Ceramic Heater with Internal Sensor

A wide range for terminals, connectors and flat ICs

Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

Zero Volt Switch Circuit

Reduces noise during heater ON/OFF

Replaceable Cartridge Filter

Makes changing the filter easy

TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES

Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)

Vacuum pressure compared with other goot models

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.

Soldering Iron Unit SVS-800AS, SVS-580AS, SVS-500AS

Specifications

MODEL		SVS-580AS
Voltage		110V,120-130V,220-240V AC 50/60Hz
Power Consumption		110V,120-130V (200W)
		220-240V (270-300W)
Power Cord Lengtd		1.5m
TemperatureSetting Range	Deoldering Unit	250−450˚C
	Soldering Unit	200−480˚C
Insulation Resistance		Over 100MΩ(500V DC)
Vacuum Pump System		Diaphragm system
Vacuum		– 0.08MPa (-600mmHg)
Accessories		Cleaning pin TP-100CP-13 Soldering iron stand ST-76
Total Weight		4.0kg (w/o cord )

Box & Unit

CONTROL BOX

CONTROL BOX
Output Voltage	110V,120-130V,220-240V AC
Dimensions	205(W) x 170(H) x 160(D) mm
Weight	3.6kg (w/o cord, hose )

DESOLDERING UNIT

Input Voltage/Power Consumption	110V,120-130V,220-240V AC 85W
Heater	Ceramaic Heater
Cord Lengtd	1.2m
Dimensions	220 x 155mm
Weight	250g (w/o cord, hose )
Standard Nozzle	TP-100N-S5

SOLDERING UNIT

SOLDERING UNIT
Input Voltage/Power Consumption	110V,120-130V,220-240V AC 70W
Ground Resistance	Less tdan 2Ω
Leak Voltage	Less tdan 2mV
Heater	Ceramic heater
Cord Lengtd	1.2m
Lengtd	190mm (witd PX-2RT-B w/o cord bushing )
Weight	70g (witd PX-2RT-B w/o cord )
Standard Tip	PX-2RT-B